EnePro power optimizer
Your equipment may be running on distorted electricity that forces it to work harder, run hotter, and fail faster. EnePro cleans it before it reaches your motors.
Key specs
10–35%
typical energy savings
2,300 J
of surge protection
Lower
peak demand charges
How the math actually works — a consistent cycle from raw power to measurable results.
STEP 1
Sensing
Monitors incoming power and back-feed from your equipment in real-time.
STEP 2
Filtering
Identifies harmonic frequencies out of sync with the 60Hz standard.
STEP 3
Correction
Pulls jagged waves back into a smooth sine-wave shape.
STEP 4
Recapture
Energy that would be lost as heat powers the motor's next cycle instead.
STEP 5
Monitoring
See the before-and-after impact on your energy dashboard in real-time.
In a perfect world, electricity follows a "pure sine wave" — a consistent, rhythmic pulse of energy known as clean power. But modern commercial environments are filled with variable frequency drives, LED lighting, and complex electronics that "pollute" the electrical lines, creating what technicians call Total Harmonic Distortion (THD). This distortion turns that smooth wave into a jagged, erratic mess. When dirty power reaches your equipment, it creates friction that manifests as electrical noise, heat, and vibration — for a grocery store with dozens of refrigeration cycles or a manufacturing plant with constant motor loads, that's a direct drain on the bottom line, not just a technical nuance.
Most commercial equipment is designed to operate on clean power. Feed it distorted electricity and several things happen at once: excessive heat, as harmonics cause motors to generate heat they weren't designed to dissipate, leading to premature insulation breakdown; vibration, as irregular pulses stress windings and bearings, causing early failure and costly downtime; and efficiency loss, as a motor fighting harmonic distortion draws more current to do the same work, so you're literally paying for energy wasted as heat and noise. A specialized air conditioner designed to last 15 years might only last 7 or 8 under constant high THD strain — you're essentially buying two units in the time you should have bought one.
Forward-thinking facilities are installing specialized power optimization technology at the panel level — not a simple surge protector, but a sophisticated system designed to "scrub" electricity before it reaches your equipment. It acts as a filter and stabilizer: absorbing harmonic "noise," correcting power factor, and ensuring motors receive the clean, steady energy they were built for. That same power factor correction also tends to lower peak demand charges for facilities billed on kVA demand, since the utility no longer has to supply the extra "reactive" power wasted by an uncorrected system. This technology is proudly made in the USA and engineered specifically for the heavy inductive loads found in commercial and industrial settings, backed by a 25-year life expectancy and a 10-year manufacturer warranty.
For many businesses, electricity is one of the top three controllable expenses — yet most owners feel they have no control over the quality of the power they receive from the utility. When you factor in the thousands of dollars saved in avoided motor replacements and emergency repairs, the ROI becomes one of the most compelling arguments in modern facility management. Whether you're running a national chain, a local manufacturing plant, or a regional school district, cleaning your power is the first step toward true energy independence — and as energy costs continue to rise and building performance standards tighten, every percent of wasted energy is money leaking out the back door.
Dirty power is electricity distorted by harmonics (THD) from modern electronics and variable-speed drives. It forces motors to run hotter, vibrate more, and draw extra current, shortening equipment life and raising bills.
Most facilities see a 10% to 35% reduction in monthly kilowatt-hour consumption once harmonic distortion is corrected.
Yes. By correcting power factor, the system reduces the reactive power your utility has to supply, which typically lowers peak demand charges for facilities billed on kVA demand.
Yes. Beyond cleaning power quality, it provides 2,300 joules of surge protection against external spikes and lightning strikes.
The unit is built for a 25-year life expectancy and backed by a 10-year manufacturer warranty.
Yes. The system can be configured for either a fully grid-tied facility or a custom off-grid energy setup.
See how much you could save
Free 90-second report. Zero upfront cost.
Many commercial facilities unknowingly waste energy they’re already paying for. We use real-time monitoring and smart controls to identify and recapture that waste. We guarantee savings opportunities worth at least 1.5 times your monthly solution cost.
124 E Cranston Ave
Fowler, CO USA
Copyright © 2026 N2 LLC. All rights reserved.